professional Programmable Temperature Controller SSR Kiln Oven kit Universal

Description

A Complete Applicable Package of Programable Digital PID Temperature Controller Ramp and Soak , Kiln Probe Thermocouple/Sensor & Solid State Relay (SSR) and Heatsink
All products are 100% Brand new, High performance and Top quality.
Controller comes in Box with
MANUAL
.
Guarantee your
Insured
Undamaged
shipping by purchasing from a Canada located seller.
Ready for Immediate Shipment.
Features & Specifications
:
This Valuable Package Includes:
Item
Quantity
Programmable Digital PID Temperature Controller Ramp and Soak with 50 Segments and SSR Output.
1
A length-adjustable Kiln Thermocouple with 6 pcs Ceramic insulator + Ceramic Terminal/Mountung block + 1m Wire Extension.
1
Solid State Relay (40A), 24-240V AC
1
Heat Sink (80 x 50 x 50 mm)
1
Dual Digital PID Temperature Programmable (Ramp & Soak) Controller with SSR output and universal type input
Use this
Ramp & Soak
PID Programmable Controller when you wish to
precisely control
the
temperature
of a kiln/heater on
certain timely cycles
.
Can be
programmed
for
multiple profiles
up to
50 segments
.
100% Brand new in Box with
MANUAL
, High performance and Top quality.
Guarantee your
Insured
Undamaged
shipping by purchasing from a Canada located seller.
Ready for Immediate Shipment.
Buy with confidence.
Applicable industries
:
- Annealing
- Jewelry
- Beer Brewing
- Ceramics
- Metallurgy
- Petrochemicals
- Kiln, Oven, Furnace and etc.
Features & Specifications
:
High accuracy 0.2%FS
Can have several different programs
Up to 50 segments
Be able to run/stop/pause/jump the program
With soft-start function
Built-in Switching Power Supply
Auto/Manual control switch from front panel
Configurable time-dominate or value-dominate controls
Modularized design
Available Segments
Up to 50 segments available for a program
Detective Temperature Range
-200 to 1800 °C (depends on input type)
Patterns
Be able to program different patterns with different segments
Input
Thermocouple: (K,S,E,J,T,B,N)
RTD: (Cu50, PT100)
Linear Voltage and current:0-5V,1-5V,0-1V,0-100mV,0-20mV,0-60mV,0.2-1V(100-500mV),-20 -+20mV(0-10V) -5V- +5V(0-50V), -100 - +100mV(2-10V)
Linear Resistor:0-80 Ohm, 0-400 Ohm
Output
Voltage pulse to drive SSR
Control action
Heating
Response time
Less than 0.5S (configurable)
Accuracy
0.2%FS+- 0.1C(Cu50 cooper resistor compensation or ice point compensation)
0.2%FS+0.2C (TC input and internal compensation)
Temperature drift
Less than 0.01%FS
0
C (Typical value is 50ppm/
0
C)
Resolution
1
0
C or 0.1
0
C(automatically change to 1
0
C when the temperature is higher than 999)
Display
Dual line - four digit - LED display
Decimal points
Configurable for all inputs
Control Method
ON/OFF
AI MPT with auto tuning, adopting fuzzy logic PID algorithm
Auto/Manual Control
Auto/manual bump less transfer from front panel
Auto-tuning
Auto-tuning and manual tuning available
Alarm Mode
Absolute value high limit, Absolute value low limit, Deviation high limit alarm, Deviation low limit alarm.
Alarm stand by
In some occasions, for example, in the heating process, when the alarm is set to as low deviation alarm, right after the power is turned on, the alarm will be triggered but there is no problem in the system, the alarm block function can solve this problem.
Soft start function
In some particular application, 100% output ratio is not allowed when the power just turned on; soft start function is a great feature to solve this problem.
SV re-transmission output
available, as feed of PLC or indicator or paperless recorder
Power Supply
90~260VAC
Dimension (DIN 1/8)
96mm*48mm (Horizontal)
Mounting
Panel Mount
High Temperature Kiln Thermocouple:
This Kiln Thermocouple includes:
1)
A Ceramic Mounting Block.
2)
1m (3.3 ft) wire extension with a Flat Pin (Miniature) connector at the end.
Its Flat Pin connector can be connected dierectly to Digital Thermometers.
By removing its Flat Pin, it can also be connected to Temperature Controllers.
Features & Specifications
:
This heavy duty Type K Kiln probe Thermocouple, with 6 Pcs Ceramic Insulator
gives you the UNIQUE option of adjusting the probe length to your exact requirement.
It can measure up to
2372 °F.
This high temperature 11 gauge kiln probe comes in 7.5 inch length.
The length of this thermocouple is measured by the number of 1 inch long ceramics.
Some extra length is added for connections.
You can adjust the length of this thermocouple by cutting the probe/thread length at installation.
Thermocouple
Type K
Measuring Temperature
-58 to 2372 °F (-50 to 1300 °C)
Gauge
11
Thread material
Cr-Ni, Si-Ni
Thread diameter (ɸ)
3.2 mm (~0.13 inch)
Thread length
190 mm (~7.5 inch)
Tube length
~150 mm (~ 6.0 inch)
Tube diameter (ɸ)
Oval shape: L=12.3 mm & W=10mm (L~ 0.5” & W~ 0.4”)
Tube shape
6 x (1 inch Pcs) Ceramic Tube
Insulator
Two-hole insulator
Solid State Relay (SSR):
Load voltage
24 - 240V AC
Load current
40A
Control voltage
3-32V DC
Control current
6-25 mA
Heat Sink:
Size
3” x 2” x 2” (80 x 50 x 50 mm)
Weight
0.22 lb (98 gr)
********** We offer different packages by combining a wide range of Controllers, SSRs, Thermocouples & Heat Sinks. You name your inquiry, we produce it for you.
********** For more information or ordering larger volumes please contact us.
"Thanks for taking time and observing this ad"
shipping to Australia, New Zealand and Asia takes longer than other countries (17-25 Business days)